Teacher Notes



Author: Mary Harris: Missouri Polymer Ambassador
Video Editing: James Brownlow: George County High School

Recommended for Middle Level or Upper Elementary.

· This is a three day laboratory.
· All the polymers for this lab will grow to several times their original size when placed in distilled water for twenty-four hours.  The bears will also shrink back to their original size if they are placed in saturated salt solution.
· Gummy bears work the best since they are small and compact.  Worms tend to break when they are enlarged with distilled water.
· If your students observe and record mass changes, the handling of the bears must be gentle since the Gummy animals get quite flexible and fragile after twenty-four hours in distilled water.
· I tried Walgreen brand and Black Forest brand gummy bears and worms.  Both bear brands work well.  The Walgreen brand is larger.  Other brands just disintegrate.
· Saturated salt water is made from Kosher coarse salt so that it will be clear.  Make about one liter of solution for a class.  Start with one liter of distilled water and add Kosher coarse salt.  Shake until it dissolves.  Add more salt and shake.  It will take about 360 g or 1 3/4 cup of salt to make the solution saturated.  Allow plenty of time for the salt to dissolve.  This usually takes overnight!  When some salt remains undissolved this indicates saturation.
· Saturated sugar water will also work.  This is a bit sticky!
· Have extra gummi animals available for eating at a different time!  Do not allow eating during the laboratory$
· It is also possible to see a decrease in size from the original bear placed in saturated salt water.  I found a decrease in mass of 41% in 24 hours.
· To introduce the activity and the concept of diffusion, demonstrate the diffusion of a drop of colored dye in water or open a perfume bottle in the room.  The molecules move from an area of high concentration to one of lower concentration.
· Typical Data:
 
Original mass (g) Day Two mass (g) after DW % Change Day Three Mass (g)
after Salt
% Change
Bear 1.7 8.1 376 1.4 -18

 
 
Original volume cm3 Day Two volume cm3 % Change Day Three volume cm3 % Change
Bear 2.31 16.92 632 1.76 -24

Written by Mary Harris, Missouri Polymer Ambassador, email: [email protected]
Movie editing by James Brownlow from George County High School, Lucedale, MS
 
 

PSLC OFFERS THIS SITE AS AN EDUCATIONAL TOOL. PSLC IS NOT RESPONSIBLE FOR ANY INJURY OR DAMAGE CAUSED TO ANY PERSON, DIRECTLY OR INDIRECTLY, RELATING TO ANY OF THE DEMOS OR EXPERIMENTS LISTED AT THIS SITE. YOU ARE WHOLLY RESPONSIBLE FOR YOUR SAFETY.

back Return to Labs Page
back Return to Level Three



Copyright © 2003 | Polymer Science Learning Center | Department of Polymer Science | University of Southern Mississippi